SHOWTEC 43548, User Manual

Page: 27 / 44

26
Spectral M3000 Zoom Q4 MKII IP65
Product code: 43548
Edit
In this menu you can edit the 10 custom programs.
01) Press the UP/DOWN buttons to choose the custom program you want to edit: PROGRAM1–
PROGRAM10.
02) Press the ENTER button to confirm the selection and open the submenu with the scenes. Each custom
program has 30 scenes, which can be edited:
03) Press the UP/DOWN buttons to select the desired scene.
04) Press the ENTER button to confirm the selection and open the submenu with the settings for the
respective scene.
05) Press the ENTER button to select one of the following 8 options:
● RED: Set the intensity of the red color. The adjustment range is 0–255, from low to
high intensity
● GREEN: Set the intensity of the green color. The adjustment range is 0–255, from low
to high intensity
● BLUE: Set the intensity of the blue color. The adjustment range is 0–255, from low to
high intensity
● WHITE: Set the intensity of the white color. The adjustment range is 0–255, from low
to high intensity
● ZOOM: Adjust the zoom. The adjustment range is 0–255, from narrow angle to wide
angle
● STROBE: Add strobe effect. The adjustment range is 0–25, from OFF to high
frequency
● TIME: Set the duration of the scene. The adjustment range is 0–255, from 0,1 to
approximately 25 seconds
● FADE: Set the fading effect between the scenes. The adjustment range is 0–255
06) Press the UP/DOWN buttons to increase/decrease the values.
07) Press the ENTER button to set the value and to move to the next setting.
08) Repeat steps 6–7 to set all 8 parameters in the scene.
09) Press the MENU button to return to the submenu with the steps.
10) Repeat steps 3–8 to edit the remaining steps of the selected custom program.