manualshive.com logo in svg

ShowMagic AV, User Manual, Page: 51 / 233

Share
Download
ShowMagic AV User Manual Download Page 51

Adjusting the Master Panel Faders via RS232/IP or DMX Input

The grand master, audio master and audio channel master faders on the master panel can also be 
adjusted using command strings received via RS232 or IP. Refer to "RS232 / IP Command String 
Protocol", p.223 for details.

The 

AM

 and 

GM

 faders can also be adjusted via DMX input channels as described in "DMX 

Settings", p.186.

Hold Button

The hold 
button

Double-clicking on this button will hold the current DMX lighting state. 
This is useful if you want to load another desk but keep the current 
lighting state running temporarily. Similarly, if you are programming 
lighting scenes but need to maintain the current DMX output then this 
button can be used to program ‘blind’.

Blackout Button

Double-clicking on this button will set all dimmer channels to
their minimum settings as defined on the patch screen.

 

It does

not affect audio.

The blackout 
button

Auto-Schedule Button

Double-clicking on this button toggles the auto scheduler on 
or off. When the schedule is running it is shown in red.

The auto-
schedule button

Section 5 - Master Panel

     39

Summary of Contents for AV










































































































































































































































Reviews:

No comments