7
Ordercode: 950105
VIBE FX Image Spot
Backside
Fig. 02
07)
Heat sink
08)
Power cable (2,5 m)
Installation
Remove all packing materials from the VIBE FX Image Spot. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Focus Adjustment
Fig. 03
Move the lens tube back and forth in order to set the focus.
