12
Ordercode: 950200
VIBE FX Strike
1. Auto Mode
01)
Repeatedly press the MODE button (03) (or press the
button) until the LED indicator (04) lights in
red.
02)
The device will now run the built-in auto show.
03)
Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
2. Sound-controlled Mode
01)
Repeatedly press the MODE button (03) (or press the
button) until the LED indicator (04) lights in
green.
02)
The device will now react to the beat of the background music.
03)
Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
3. Intelligent Mode
01)
Repeatedly press the MODE button (03) (or press the
button) until the LED indicator (04) lights in
orange.
02)
The device will now run the built-in auto show. The device will also react to the beat of the
background music (when music is present).
03)
Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02)
There may not be any deformations on housings, fixations and installation spots.
03)
Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04)
The electric power supply cables must not show any damages or material fatigue.
The VIBE FX Strike requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light
output very quickly.
Please clean internal components once a year with a light brush and vacuum cleaner.
Summary of Contents for 950200
Page 16: ...2017 Showgear...
