960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 23 -
IP address Phone Map
If you plan on adding IP DECT handsets at a different site, you will need to create an “IP Address Phone Map”.
Create an “IP Address Phone Map”. You can do so via ShoreWare Director, navigating to the “
Administration
” ,
followed by “
IP Phones…
” , then “
IP Address Phone Map
” screen, then adding an entry for the desired site, with
the IP address range of the IP DECT handsets. For more information on creating sites and adding switches, please
refer to the ShoreTel Planning and Installation Guide.
This completes all of the ShoreTel configuration parameters necessary to install the IP DECT handsets.
Ascom Configuration
The following steps detail the configuration process for the Ascom.
Configure the Master IP-DECT Base Station or the IP-DECT Gateway
The Ascom IP-DECT Base Stations /IP_DECT Gateway can be configured in a Master/Standby Master scenario to
provide redundancy or to extend the radius of coverage.
The following configuration steps detail the configuration process used to configure an Ascom IP-DECT Base
Station in Master mode with one Standby Master base station but the same steps are applicable also for the IP-
DECT Gateway.
Step
Description
1
Launch a web browser. PlaceDECT Base Station’s MAC address) in the web browser’s URL. For example if an IPBS has MAC:
00-01-3F-00-C7-B9 the user would put
The user will be presented with a start up screen. Select the
System administration
link to login
