-25-
M1036 Micro Mill
O
PE
R
ATIO
NS
ACCESSORIES
The following mill machine accessories may be available through your Woodstock International Inc.
Dealer. If you do not have a dealer in your area, these products are also available through online dealers.
Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at:
1-800-840-8420 or at [email protected].
The
SHOP.FOX.M1038.2.
5
⁄
8
".Tall.Quick.Vise
makes secur-
ing your work is quick and easy. A simple pawl engages
a rack that is advanced by the vise screw, so very little
turning is required to tighten the vise. Includes a stur-
dy lip along both sides of the base, allowing vise to be
mounted to nearly any machine table, using common
T-slot clamps.
The
.SHOP.FOX.M1037.5PC..COLLET.SET
allows you to
quickly switch to the collet that matches the required
tooling for the job. This 5-pc. set includes shank with nut
and
3
⁄
64
",
5
⁄
64
",
5
⁄
32
",
3
⁄
16
", and
1
⁄
4
" bits.
The
2-FLUTE.(D2699).and.4-FLUTE.(D2703).STANDARD.
SOLID.CARBIDE.END.MILLS
can not be beat for finish
and durability. With micro grain structure and precision
grinding, these end mills will breeze through the toughest
machining jobs. Visit shopfox.biz for additional standard
size or long end mills in two- and four-flutes.
The
D4274
Magnetic Base/Dial Indicator Set features
a magnetic base that engages with just the turn of a
switch and allows pinpoint adjustment. The dial indicator
features 0-1" travel and has a resolution of 0.001". This
fine set includes a molded case for protection and
convenience. Precision measurements and setups have
never been so easy.
