SHNING 3D Aoralscan 2 User Manual Download Page 32

Page: 32 / 112

Aoralscan 2 User Manual

SHNING 3D TECH Co.,Ltd Copyright



- 31 -

4.2. Disconnecting the Scanner

CAUTION

Do not attempt to directly disconnect the scanner by removing the

power cable and USB cable.

Follow the steps below to safely disconnect the scanner:

(1)Quit the IntraoralScan scanning software.

(2)Turn off the power switch on the cradle.

(3)Disconnect the scanner cable from the cradle.

(4)Disconnect the USB 3.0 cable from the USB 3.0 downstream port on

the cradle and your computer.

(5)Right-click the

“Safely Remove Hardware” icon on Windows taskbar

and select

”Eject Flash Drive”.

(6)Unplug the 2-in-1 USB dongle and keep it in a safe place for future use.

(7)Unplug the power adapter from the wall outlet and remove the power

plug from the power connector on the cradle.

CAUTION

Do NOT roll the cable over the handle of the scanner or even create

any sharp bends in the cable after you disconnect the scanner. See USB

cable storage on chapter 3 for more details.

4.3. Calibrating the Scanner

Under these circumstances, we recommend that you shall execute the

calibration for the scanner to ensure the accuracy of scanned data:



The initial setup of the scanner is completed.



The scanner has been used for a period of time (e.g. 2 weeks).



The scanner is accidentally dropped.

Summary of Contents for Aoralscan 2













































































































Search results

Summary of Contents for Aoralscan 2

Reviews:

Brands by name

Popular brands

SHNING 3D Aoralscan 2, User Manual

Search results

Summary of Contents for Aoralscan 2

Reviews:

Brands by name

Popular brands