Shinybow USA SB-5654, Instruction Manual, Page: 6 / 12

1x4 HDMI DISTRIBUTION AMPLIFIER
POWER
1 2 3 4
IR IR
PAGE 6
SB-5654 INSTRUCTION & OPERATION MANUAL
FRONT PANEL
2 1
4
POWER ON SWITCH
IR SENSOR
1
3
The power switch turns the unit on and off.
The LED will illuminate red to indicate
that the switcher is ON and is receiving power
INPUT SOURCES STATUS DISPLAY 2
Input source 1 to 4 LED illuminates blue to indicate
that a video source is present on that input.
The IR sensor receives IR commands from the
supplied remote controller.
19 INCH EAR MOUNT PAIR 4
19 inch case Ear Mount pair
Part number : 1U-300L
FRONT PANEL
CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input-output, Power requirements
plus any controls present.
Before using the distributor, please take the time to make certain that the device you wish to connect to its inputs
is functioning properly in all respects. Verify that the video and audio signals are present and are being displayed
properly on a suitable device.
If all is well connect the appropriate cables between the output of the device you wish to distribute to output(s)
of the distributor to the carious devices you wish to feed a signal to. Lastly, connect the AC to DC adaptor,
connect the DC connector to the distributor first and then plug the adaptor into a functional AC outlet.
3
SB-5654