PAGE 8
SB-3879 INSTRUCTION & OPERATION MANUAL
Before making any connections to the scaler, observe the following:
> Ensure the mains voltage supply matches the label on the supplied plug-
pack (+/- 10%).
> Ensure that the power switch is OFF.
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering the device within a system of multiple power sources
that are separated by large distance.
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio/video source and display devices.
> Power up all source and display audio-visual devices.
> To yield video/audio to an output, select the input source by using
> Upon powering up, the scaler will automatically apply the setting
the front panel input buttons, the supplied IR remote control,
or through the RS 232 serial communication port.
3
4
13
2
IR REMOTE : SW-3879
IR REMOTE CONTROL KEY :
last used.
1
11
8
5
10
6
9
5
6
7
7
7
7
8
9
10
11
12
12
13
1
2
3
4
Power on and off
: turn on or off the scaler
Mute:
stop playing sounds
Source (HDMI, VGA, DVI, DP, YP
B
P
R
, Video, S-Video)
:
select your input signal type
Enter:
confirm your selection/enter the next layer
of OSD options
Arrow keys
: move up, down, left or right between
the OSD options. Use left and right keys to adjust
the value of a parameter. Use down key to enter
the next layer of options and up key to move back.
Return
: return to the upper layer of OSD options
Menu
: open up the OSD menu
Info
: check the connection status of input/output/
RS232/Ethernet ports
Exit
: leave the OSD menu
Output (XGA, WXGA, 720p, 1080p, others)
:
select the desired output resolution supported
by your display device
OSD time out
: adjust the OSD menu display time
Video wall:
open the video wall options
For guidance on the OSD options, please refer to the OSD instruction manual.