Shining3D Aoralscan 2 User Manual Download Page 8

Page: 8 / 108

Intraoral Scanner User Manual

All electrical and electronic devices must be disposed of separately from your other

household waste in order to promote reuse, recycling and other forms of recovery, to

prevent any potential adverse effects of hazardous substances on the environment

and human health, and also to reduce the amount of waste in landfill. This includes

accessories such as power adapters, power cords, etc. Do safely dispose of the

device and its accessories in accordance with applicable laws and regulations.
For specific information on disposal of your device and the packaging, contact your

local distributor or service provider.

Typographics

Special notes, cautions, and warnings that appear throughout this

User Manual

are

designed to ensure that you perform specific tasks properly, preventing unnecessary

errors.

This icon marks NOTE(S); additional information for particular situation.

This icon marks CAUTION(S); improper actions or conditions that may

damage the product or injury, and consequently void your warranty or

service contract or lose the patient data or system data.
This icon marks WARNING(S); the safety instructions that you must

precisely follow in order to avoid injury. Failure to observe can cause

damages to your product, or result in personal injuries, or even death.

Warranty

The warranty is void if unauthorized personnel perform service or maintenance on the

set of

Aoralscan 2

. To ensure correct product performance and to obtain warranty

service, contact technical support. For more information, see the following.

Contact information

Manufacturer

Shining 3D Tech Co., Ltd.

No.1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China

en.shining3d.com

Customer Support

：

[email protected]

CHAPTER

Summary of Contents for Aoralscan 2













































































































Search results

Summary of Contents for Aoralscan 2

Reviews:

Brands by name

Popular brands

Shining3D Aoralscan 2, User Manual

Search results

Summary of Contents for Aoralscan 2

Reviews:

Brands by name

Popular brands