Shining 3D Transcan-C User Manual Download Page 9

Page: 9 / 60

Shining 3D Transcan-C_User Manual_V1.4.2

Set Software

2.1.

Download the Software

Step 1:

Go to https://www.einscan.com/support/download/.

Step 2:

Select your scanner model.

Step 3:

Download the software to your operating computer.

Note:

You are required to register before downloading.

2.2.

Install the Software

Double click installation package, accept the modification on your computer.

Follow the instructions to complete the software installation.

After the software is installed, a shortcut

will be created on your desktop. Double-click to

open the software.

2.3.

Firmware Update

When the scanner firmware is incompatible, a message will appear when software is open.

Click Upgrade and follow the instruction to update the device firmware.



Firmware updating will take around 3 mins.



Power off the device after upgrading successfully.



Reconnect the device, and open the software again, the device is running under the
latest firmware.

Note before installation:

Administrator rights are required for the installation of the software.

Summary of Contents for Transcan-C





























































Search results

Summary of Contents for Transcan-C

Reviews:

Related manuals for Transcan-C

Brands by name

Popular brands

Shining 3D Transcan-C, User Manual

Search results

Summary of Contents for Transcan-C

Reviews:

Related manuals for Transcan-C

Brands by name

Popular brands