Shining 3D Transcan-C_User Manual_V1.4.2
42
Click “
Apply
” button to smooth data, preview the result of current setting.
Click “
Confirm
” button to apply the “Smooth” setting.
Click “
Cancel
” button to quit, and go back to the original data.
Multiple operations on “Smooth”, the result will not be added. It will always operate on the
original data.
7.2.6.
Remove Small Floating Parts
Remove small floating parts in the scan data.
0 means no operation, 100 is the maximum. The maximum value is the square of the
diagonal length of the floating part/10, MAX=(L/10)^2.
Diagram of removing floating parts shows as below:
Original data
Remove floating part-10
Remove floating part-50
Remove floating part-100
Click “
Apply
” button to remove floating part, preview the result of current settings.
Click “
Confirm
” button to apply the “remove floating part” setting.
Click “
Cancel
” button to quit, and go back to the original data.
Multiple operations on “Remove floating part”, the result will not be added. It will always
operate on the original data.
Auto Hole Filling
Input the perimeter of the biggest hole to be filled. Less than 100mm is recommended. This
function will fill every hole with a smaller perimeter than the number input.
