Shining 3D Transcan-C_User Manual_V1.4.2
3
1.
Specification and System Requirements
1.1.
System Requirements
Preparing a suitable computer will improve your scanning experience.
One important notice for PC configuration is the
graphic card
. It must be
Nvidia card
since certain
function from Nvidia is needed for scanning.
GTX series card
is the best for scanning while Quadro
series CAD card also works but you need a more expensive model comparing to the GTX series to get
a good scan experience.
Attention:
When running the software, do not turn on the power saving mode of the computer.
1.2.
Hardware Installation
Unpack and set up your scanner before getting started with scanning.
1.2.1.
Assemble Scanner
1) Open the tripod and place it on the ground. The three tripods can be extended and retracted. After
adjusting the height, lock and fix the tripod.
2) If the height is still too high or too low, loosen the lock [2] to adjust and fasten vertical slide rod to
an appropriate height.
3) Unscrew the quick shoe from the top of the tripod and fix it on the bottom of the scan head.
Item
Recommended
Graphics card
NVIDIA GTX serial cards higher than GTX1080
USB port
At least one USB 3.0 port
OS
Win10 64bits
Video memory
≥ 8G
RAM
≥ 32 GB
CPU
i7-8700 or higher
Screen resolution
1920*1080 DPI: 100%; 125%
3840*2106 DPI: 100%; 125%; 150%