SHINING 3D - EinScan Pro 2X series - EXScan Pro 3.5 - User Manual –
Nov
2020
44
Photogrammetry System to achieve a high accuracy Markers Frame for large object,
in which you can scan the object in detail and match the global accuracy of Markers
Frame.
Browse to load a GMF
⚠Note:
We suggest you use GMF file for task of scanning large size object with high
accuracy. When using the global markers file, new markers cannot be scanned.
Global markers points can be deleted.
Click the work button to create or load a new work
When a project is open, click the
work button
to create or load a new work. The new
work will be with the same scan mode. Unsaved changes will be lost.
5.1.2.
Working Distance
Adjust the distance between the object and device. Make sure the scanner will not
move during the scanning.
HD
Closer limit (mm)
410
Optimal distance (mm)
510
Upper limit (mm)
610
Check the projected cross on the on the preview windows. Adjust the working
distance until the cross is inside the central box. At the proper working distance, the
cross should be seen clearly with a sharp contour on the surface.
On the Right camera, at a too close distance the projected cross will be shifted to the
left , to the right when too far