Life is like riding a bicycle – in order to keep your balance, you must keep moving
Shinga BV | Molendijk Zuid 23B, 5482 WZ Schijndel | The Netherlands | Tel: +3185 401 2738 | Email: [email protected] | KVK.: 62140957
Shinga Scamper_EN.docx
7
Easy start up:
1. Press button on the left side of the battery to switch
battery On/Off. A green light indicates the battery is
turned On. Pressing the button on top of the battery will
indicate the battery status.
2. Press and hold
“C”
(On/Off) button on display unit for 2
seconds to turn the display on. Display will light up.
3. To turn On/Off bicycle lights, press and hold
“S+”
button for 2 seconds.
4. To activate 6 km/h auto drive, press the throttle on left.
Caution: Auto drive will start immediately! E-bikes
equipped with older type torque sensor do not have
autodrive.
To turn off, the brake levers.
5.
Pedal forward during gear changes and do not use excessive force.
6.
Make sure the battery is charged. Partially charged battery can be used, but keep in mind the distance you want
to ride.
7.
The E-bike is supported by an electric motor. The support will be activated when you use the pedals. Additionally,
using the right handgrip will give you extra support directly from the motor.
8.
The electric power support will stop when you use the brake levers, stop pedaling or release the handgrip.
9.
For additional information about the display unit, see manual “LCD Display”.
10.
Local traffic regulations need to be followed at all times.