Shindaiwa dga50c, Owner'S And Operator'S Manual

Page: 34 / 52

32
9-2. During Operation
(1) Post startup check
Make sure that all meters (gauges) and displays are working properly.
(Refer to 5. Equipment)
Check for any unusual vibration or noise.
Check for any unusual color from the exhaust. Under normal condition,
the exhaust gas has no color or light bluish color.
<Caution>
If finding out abnormality, consult with our authorized distributor or our
engineering section in order to repair, without using the machine.
(2) Adjustment during operation
Make subtle adjustment to voltage using the Voltage Regulate Dial, by monitoring
Voltage Meter during operation.
■
Extracting the air out of the fuelling system for engine stop due to no fuel
※ ※ ※ ※
Refer to the User’s manual for Engine.
This generator is equipped with automatic extracting feature.
Thus if the engine stops due to running out of fuel, follow the next steps to extract
the air out.
Add fuel to the fuel tank.
Turn the Starter Switch to RUN position. It will take approximately 30
seconds to extract the air out.
<Caution>
In the case air is in the fuel line, the engine speeds is unstable.
In the case, perform the vacuum again.
1
2