Shindaiwa C302TS, Operator'S Manual, Page: 30 / 128

28
Specifications
Specifications
These specifications are subject to change without notice.
T302TS C302TS
External dimensions: Length × Width × Height (without cutting at-
tachment)
1799 × 349 × 344 mm 1799 × 695 × 525 mm
Mass:
Unit without fuel, cutting attachment and harness (ISO11806-1: 2011)
Unit with fuel, specified cutting attachment, guard and harness
Unit without fuel, cutting attachment, guard and harness 6.5 kg
7.5 kg
6.0 kg 6.8 kg
8.2 kg
6.3 kg
Volume: Fuel tank (full) 710 mL
Fuel: Gasoline
Oil
Mixture ratio
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing me-
thyl alcohol or more than 10% of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Standard
(ISO/CD 13738), JASO FC,FD grade and shindaiwa
Premium 50:1 oil.
50:1 part (
2% )
Cutting attachment:
Nylon line cutting head (Cutting swath)
Thread
Nylon cord size (diameter)
Nylon cord length SF400 (510)
Left-handed thread M10×1.25 pitch
2.4 mm
6.0 m
Gear Case: Gear ratio and lubrication
Rotational direction of output shaft viewed from above
maximum rotational frequency of the spindle
1.62 reduction and good quality lithium grease
Anticlockwise
7720 r/min
Engine: Type
Carburettor
Magneto
Spark plug
Starter
Power transmission
Engine displacement
Maximum shaft brake power (ISO 8893)
Fuel consumption at maximum engine power
Recommended maximum engine speed (With STD attachment in-
stalled)
Recommended engine idling speed
Air cooled two stroke, single cylinder
Diaphragm type
Flywheel magneto - CDI system
NGK CMR7H
Recoil starter
Automatic centrifugal clutch
30.5 cm
3
1.34 kW
0.72 L/h
10200 r/min
2800 - 2900 r/min
2006/42/EC
Vibration
(ISO 22867) a
hv,eq
Left handle
Right handle
Uncertainty K 2.9 m/s
2
4.6 m/s
2
1.2 m/s
2
4.2 m/s
2
3.2 m/s
2
1.2 m/s
2
Sound pressure level (ISO 22868) LpAeq
Uncertainty K
pA
98.1 dB(A)
1.5 dB(A) 98.3 dB(A)
1.5 dB(A)
Sound power level (ISO 22868) L
WARa
Uncertainty K
WA
111.7 dB(A)
2.1 dB(A) 112.2 dB(A)
2.1 dB(A)