Shimpo FGS-100VC, Operation Manual, Page: 20 / 32

- 16 -
Parameter
The parameter, which is the repeat times and the dwell timer and the speed of pull and push, is available while
stopping.
Pressing SET button, the speed and the repeat times can be changed by UP or DOWN key of the SPEED, the
dwell timer can be changed by STOP.
Finally press SET button for saving.
If you want to cancel the setting, press ZERO button.
Setting speed
The UP or DOWN button of the
SPEED can be used to change.
The range is 10 to 400[mm/min].
Setting dwell timer
The STOP button of the dwell
time can be used to change.
Pressing STOP, the dwell timer is
incremental.
When the dwell timer is 5s, it
returns to 0s pressing STOP.
SET
SET
SET
Saving, return to SING mode
SET
Setting dwell timer
The UP or DOWN button of the
SPEED can be used to change.
The maximum value is 9999.
When the display is o and press
DOWN it will be 9999, and when
the display is 9999 and press UP
it will be 0.