Technical Service Instructions
SI-TIREB
Installing and removing
tubeless tires
General Safety Information
• The air pressure should be within the range of 200-400kPa {29-58psi}.
• The tires should always be installed and removed by hand. Never use tools such
as tire levers, as they can damage the seal between the tires and the rims and
cause air to leak out from the tires.
• Do not tighten the valve nut too much, otherwise the valve seal may become
warped and air leaks may occur.
CAUTION
• Read these Technical Service Instructions carefully, and keep them in a safe place
for later reference.
Note
• If the tires are difficult to fit, use plan water or soapy water to help them slide
more easily.
• Parts are not guaranteed against natural wear or deterioration resulting from
normal use.
WARNING
Valve nut
1. Installing tubeless tire valves
}
Install the valve so that it faces as
shown in the illustration.
When tightening the valve nut, check
that the valve does not turn together
with the valve nut.
t
