List of tools to be used
The following tools are needed for installation/removal, adjustment, and maintenance purposes.
Component
Location used / screw type
Tool
Electric wire
(EW-SD300)
Plug
TL-EW300
Battery mount
(BM-EN400)
Key unit
Cross head screwdriver [#2]
Slotted screwdriver (6.5 mm)
Lower case
Cross head screwdriver [#2]
Upper case
Hexalobular [#10]
Battery mount
(BM-EN600)
Lower case
3 mm hexagon wrench
8 mm spanner
Key unit
3 mm hexagon wrench
Key unit
(adjust installation location)
TL-BME02
Key unit cover
Upper case
2.5 mm hexagon wrench
Battery mount
(BM-EN800)
Upper bracket
4 mm hexagon wrench
Spring unit
1.5 mm hexagon wrench
Latch base / key cylinder / lower
bracket / connector unit
3 mm hexagon wrench
TL-BME04 / TL-BME05
Unlock pin unit
2.5 mm hexagon wrench
Satellite charging port
(EW-CP100)
Fixing screw
2 mm hexagon wrench
Satellite system ON/OFF switch
(EW-SW310)
Fixing screw
2 mm hexagon wrench
Maintenance
(BM-EN800)
Double latch plate
2 mm hexagon wrench
Spring unit
1.5 mm hexagon wrench
List of tools to be used
14
