Shimano EDISON COMP I-12 Page 251 Original Operating Instructions Download

Page: 251 / 257

MY22H03 - 22_1.0_01.10.2021

250

Glossary

Wheel

Source: ISO 4210 - 2:

unit or combination of hub,

rim and spokes or disc, but excluding tyre assem-
bly.

Work environment

Source: ISO 9000:2015:

set of conditions under

which work is performed.

Year of manufacture

Source: ZEG:

the year of manufacture is the year

in which the pedelec was manufactured. The pro-
duction period is always from May to July the fol-
lowing year.

12.1

Abbreviations

ABS = anti-blocking system

ECP = electronic cell protection

12.2

Simplified terms

The following terms are used for better legibility:

Term

Meaning

Operating instruc-
tions

Original operating instruc-
tions

Damper

Rear frame damper

Specialist dealer

Bicycle specialist dealer

Motor

Drive motor, sub-system

Belt drive

Toothed belt drive

Table 74: Simplified terms

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands