Shimano EDISON COMP I-12 Page 215 Original Operating Instructions Download

Page: 215 / 257

MY22H03 - 22_1.0_01.10.2021

214

Troubleshooting, fault clearance and repair

9.5.3.3 Suspension too soft on inclines

The fork deflects at a low point in the terrain. The
deflection is quickly used up, the rider's weight

shifts forward and the pedelec loses some
momentum.

Figure 251: Excessively soft suspension in the suspension fork on hilly terrain

Solution

Figure 252: Changing compression adjuster to a harder
setting



Turn compression adjuster clockwise.



The damping and compression hardness is
increased and the deflection stroke speed is
reduced. Efficiency on hilly and flat terrain is
improved.

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands