Shimano EDISON COMP I-12 Page 139 Original Operating Instructions Download

Page: 139 / 257

MY22H03 - 22_1.0_01.10.2021

138

Operation

6.23.1.1 Adjusting the RockShox compression adjuster



Turn

compression adjuster

clockwise.



The damping and compression hardness is
increased and the deflection stroke speed is
reduced. Efficiency on hilly and flat terrain is
improved.

Figure 150: Changing compression adjuster to a harder
setting



Turn

compression adjuster

anti-clockwise.



The damping and compression hardness is
reduced and the deflection stroke speed is
increased. Sensitivity to small bumps is
increased.

Figure 151: Changing compression adjuster to a softer
setting

Summary of Contents for EDISON COMP I-12


































































































































































































































































Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands

Shimano EDISON COMP I-12, Original Operating Instructions

Search results

Summary of Contents for EDISON COMP I-12

Reviews:

Related manuals for EDISON COMP I-12

Brands by name

Popular brands