11
Switching the traveling data display
On the main screen, you can check various traveling data in addition to the current speed. The traveling data that can be
displayed differs according to the assist bicycle.
1.
On the main screen: Press <A>.
Current gear position
Traveling range
The traveling data switches in the following order each time <A> is pressed.
Display item
Explanation
[GEAR]
Current gear position*1
[RANGE]
Traveling range*2
[DST]
Traveling distance
[ODO]
Cumulative distance
*1
Only displayed for electronic gear shifting.
*2
The traveling range (reference value) for the selected assist mode. The display switches each time the assist mode is
switched. The value is not displayed when the assist mode is set to [OFF].
•
If the traveling data display is switched when [ODO] is displayed, the screen will switch back to displaying [GEAR] (for electronic gear
shifting) or [RANGE] (for mechanical gear shifting).
•
The traveling data display condition that was last displayed is retained even when the power is turned OFF.
•
Even when the traveling data display is switched to something other than [GEAR], the screen will switch to displaying [GEAR] for
approximately two seconds when a gear shift operation is performed.
Display units
This product can switch the display units of speed, traveling distance, and cumulative distance to km or miles. It is
necessary to connect to E-TUBE PROJECT (PC version) to switch the display units. For the connection method and setting
procedure, contact your place of purchase.
Displayed in km
Displayed in miles