93
15. Connecting Peripheral Instruments
Read Chapter 7 Before Use of
These Pages
15.3.7 Delimiter
The “delimiter” is used to separate individual pieces of data or commands. Set the delimiter as follows:
Set to CR(0DH):
Select menu item
.
Set to LF(0AH):
Select menu item
.
Set to CR+LF(0D0AH):
Select menu item
.
WindowsDirect setting (down) :
equivalent to pressing the Enter key of the computer after typing the value:
Select menu item
.
WindowsDirect setting (right) :
equivalent to pressing the right arrow key of the computer after typing the value:
Select menu item
.
15.4 Decimal Point Symbol in Output Data
The decimal point symbols in the outputted data to external devices can be selected from “.” (period) or
“,” (comma) depending on your preference. Note that the decimal point expression on the balance dis-
play is always with “.” (period).
To select “.” as outputted decimal point, select menu item number .
“dECP-Pr”
To select “,” as outputted decimal point, select menu item number .
“dECP-Cn”
Note
Settings for “WindowsDirect” (menu items
and
)
When these menu items are selected, it is not possible to send commands
to the balance from the peripheral instruments.
Note
The setting made here in “Decimal Point Symbol in Output Data” will not
be cleared with Menu reset (See
94
95
96
97
98
97
98
72a
72b
Summary of Contents for UW2200HV
