67
15. Connecting Peripheral Instruments
Read Chapter 7 Before Use of
These Pages
(ii) Commands related to operation keys
(iii) Commands related to application measurement
(iv) Commands related to unit conversion
POWER
Equivalent to the
[POWER]
key.
Q
Equivalent to the
[POWER]
key.
MENU
Equivalent to the
[CAL]
key.
TARE
Equivalent to the
[O/T]
key.
T
Equivalent to the
[O/T]
key.
UNIT
Equivalent to the
[UNIT]
key.
Equivalent to the
[PRINT]
key.
POWER+
Equivalent to holding the
[POWER]
key for approximately 3 seconds.
MENU+
Equivalent to holding the
[CAL]
key for approximately 3 seconds.
UNIT+
Equivalent to holding the
[UNIT]
key for approximately 3 seconds.
PRINT+
Equivalent to holding the
[PRINT]
key for approximately 3 seconds.
RECALC
Equivalent to the
[RECALC]
key of the AKB-301Application Keyboard.
C
Equivalent to the
[C]
key of the AKB-301 Application Keyboard.
PEAK
Sets the Peak Hold mode.
AZERO
Sets the Auto Zero mode ON.
INTERVAL
Sets the Interval Timer mode.
ADDON
Sets the Auto-Memory and Zeroing mode.
+
Immediately operates after setting the Auto-Memory and Zeroing mode.
A
Sets the Animal Weighing mode.
ANIMAL
Sets the Animal Weighing mode.
R
Releases the Application weighing mode.
g
Switches to “g” unit.
kg
Registration of “kg” unit and switching.
mg
Registration of “mg” unit and switching.
PERCENT
Registration of “%” unit and switching.
%
Sets 100% when display is in “%” unit.
G
g
← →
% switching.
PCS
Registration of “PCS” unit and switching.
CT
Registration of “carat” unit and switching.
MOM
Registration of “momme” unit and switching.
SDENSE
Registration of “solid density” unit and switching.
LDENSE
Registration of “liquid density” unit and switching.
CU
Switches to “user” unit (Set the conversion coefficient beforehand.).
RSTUNIT
Returns the default units.