47
13. Enhancing Productivity
Read Chapter 7 Before Use of
These Pages
13.1.3 Target Mode
This mode is useful for constant amount weighing of liquid or judgment of excess and shortage.
The target value is the numeric value that is the desired amount in the unit that is used for weighing.
The limit value is the numeric amount above or below the target value that is acceptable. The target will
be indicated as the center line in the analog display. The limits will be indicated as triangle marks. A
moving bar represents the current weight on the pan.
1
Select the Target mode with menu item
.
2
Set the “target” value, which corresponds to the
center line of the graphic
display, with menu item
.
3
Set the “limit” value, which corresponds to the
distance between the center line and upper or
lower triangle marks, with menu item
.
Without load
With a load within
the limit range
Display examples in use
←
target
→
12
13
14