29
8. Built-in Clock Set-up
Read Chapter 7 Before Use of
These Pages
8.3 Setting Display During Stand-by
Determine what is to be displayed during stand-by.
To display the time during stand-by,
select menu item
.
To display the date during stand-by,
select menu item
.
To display neither during stand-by,
select menu item
.
Notes
Convenient Functions of Time Display
The following functions are available when the time is displayed during
stand-by.
•
Seconds display function
:
Press the
[UNIT]
key to enable the display/non-display of seconds.
•
±30 seconds correction function
:
Press the
[CAL]
key while seconds are displayed. If the value is
between 00 - 29 seconds, the seconds are rounded down to zero. If the
value is between 30 - 59 seconds, the value is rounded up one minute
and 00 is displayed for seconds.
65
66
67