19
High-Speed Video Camera
HPV-X2
Pr
epa
ra
tio
n
s fo
r Op
er
ati
on
4.3
Starting Up the High-Speed Video Camera
1.
Hold down the power button on the power unit for three seconds to switch ON
the camera system.
2.
Switch the control computer ON.
3.
Log in to Windows. (See
Logging In and Out of Windows.
)
4.
Double-click the
icon on the desktop.
The main window of the display software is displayed.
If the camera system is switched ON while the display software is running, restart the display
software.
4.4
Logging In and Out of Windows
■
Logging In to Windows
1.
Display the logon screen for Windows.
2.
In the logon screen, enter "shiva" in the password field under [HPV-X] and
press the [Enter] key.
The Windows desktop appears.
The control computer is a dedicated controller for the high-speed video camera. It is not intended
for use as a general use computer. Consequently, high-speed video camera operation is not
guaranteed if any of the factory settings are changed or if other software is installed.
The HPV-X password can be changed, but make a note of the changed password, as it is required
during maintenance or to make changes to the system.
Without the password, it may be impossible to log in to the system.
✐
Note
✐
Note
