Shimadzu GC-2014, Instruction Manual

Page: 32 / 318

2 Before Use
2.2
2
.
20
GC-2014
2.2
Outputting Analog Signals to the Chromatopac
GC-2014 can output analog signals for two channels, and detector signals to be outputted to
each channel can be set using keys. When a detector is changed, output can be changed
using keys without changing the connection on the back of the GC.
■
Connecting the Chromatopac signal cable
Connect the attached Chromatopac signal cable to the connector (ANALOG OUT1 or 2) on
the back of the GC. (Fig. 2.2.1)
Using this cable, analog signals can be outputted and the Chromatopac can be started when
the GC starts. (Refer to
“16.6.9 Setting the link device code” )
ANALOG OUT
2
ANALOG OUT
1
AOC
IN
JE
C
IO
R
1
IN
JE
C
IO
R
2
SAMPLER
EVENT OPTION
1
2
3
4
5
6
RS
-
232C
RS
-
232C
O
P
1
LINKST
AR
T
OUT/READY
IN
S TA R T I N
READY OUT
AOC POWER SUPPLY
S TA R T OUT
Back of the GC
AOC built-in power source
ANALOG OUT 1=Ch1
ANALOG OUT 2=Ch2
Fig. 2.2.1 Connecting the Chromatopac signal cable