86
14. Communication with Peripheral Devices
(Selecting one of standard Settings)
1
From the mass display, press the
[CAL]
key
repeatedly until the [intFACE] display appears.
Press the
[O/T]
key. The display shows “iF;F1”
2
If necessary, press the
[CAL]
key repeatedly
until the desired standard setting display appears.
Then, press the
[O/T]
key.
3
Press the
[POWER]
key repeatedly to return to
the mass display.
14.3.3 User Setting
The user setting allows individual setting for each item in communication settings.
Making user settings
1
In mass display, press the
[CAL]
key repeat-
edly until “intFACE” appears and press the
[O/T]
key. “iF:F1” appears.
2
Press the
[CAL]
key repeatedly until “iF: USEr”
appears and press the
[O/T]
key. “io.b:
∗∗∗∗
”
appears (communication speed settings).
(
∗∗∗∗
shows the current setting; 2 to 4 characters,
the same applies hereafter.) After this, pressing
the
[CAL]
key alternates the display in this order:
“io.d:
∗∗∗∗
” (delimiter setting), “io.P;
∗
:
∗∗
” (parity
setting), “io.S:
∗∗∗∗
” (stop bit setting), “io.F:
∗∗∗∗
”
(data format setting), and “io.H:
∗∗∗∗
” (handshake
setting).
3
When the item to be set appears, press the
[O/T]
key. (Refer to the following selections thereafter. )
(When F1 is selected)
(When F1 is selected)
(Example)
(Example)
(Example)
(Example)
(Example)
(Example)
Displays of all the items
