71
1
3
5
2
4
6
7
8
12
14
13
9
10
11
66
Settings
Settings
Printing the Menu Setting Status
It is possible to output the status of the menu settings.
The details that can be output are listed below.
Item
Details
Measurement
Mode
Balance ID settings, minimum weighing value, weighing mode, mode (Standard
measurement, Piece counting measurement, Percent measurement, Averaging
mode, Solid specific gravity, liquid density, Add-on mode, Formulation mode, Sample
preparation, Recipe preparation)
Setting
Related
smart setting values, targeted settings, Pass/fail evaluation, Filling mode settings,
weighing units (registered units), Stability detection range setting, stability mark
illumination setting, zero/tare timing, Zero tracking, Auto tare, Auto zero
Calibration
Related
Calibration (calibration types registered with the CAL key) (ICAL, ECAL, ITEST, ETEST)),
PSC (Perfect Self Calibration) (ON/OFF, operation conditions (temperature Fluctuations,
permissible errors)), time-specified adjustment settings, calibration log output, print functions
USB Memory
Related
USB memory saving settings (weighing values, records of calibration), USB saved data
format (printing format, CSV format)
Output
Related
output function types registered in [PRINT] (one-time output, interval output, auto print),
Output timing, date and time printing, minimum weighing value printing, sample ID
printing, measurement No. printing
Communication
setting Related
RS232C Communication settings (mode, baud rate, parity, stop bit, handshake, data
format and delimiter selected with the standard 1 – 5), USB Communication setting
s (mode, baud rate, parity, stop bit, handshake, data format and delimiter selected with
the standard 1 – 5)
System
Related
date format, brightness setting, buzzer sound, Ion irradiation time, barcode setting,
OP mode settings (ON/OFF, set time), Decimal point display setting, display language,
Touchless sensor configuration (assigning functions)
Log-in
Related
Administrator, log-in function, user information (information on user logged in and detail
settings)
1.
Connect a personal computer or printer (optional) to the balance
[9 Connections and Communications with External Equipment] (P.128)
2.
Call out the menu setting status output function
(1) Press [
MENU] while in the weight measurement mode, and then press [
LEFT].
(2) Select [
System settings], and then press [
OK].
(3) Select [System settings], and then press [
OK].
3.
Output the menu setting status
(1) Select [Menu setting output], and then press
[
OK].
(2) Press [
OK].
The menu setting status will be output.
The screen will return to the weight measurement
mode when output has been completed.
