146
9
9
Connections and Communications with External Equipment
Connections and Communications with External Equipment
Setting the Details to Print
Sets whether to print the date, time, barcode ID or sample ID together with the weight value.
1.
Call out the Print menu
Press [
PRINT] for three or more consecutive
seconds without releasing it.
Press [
OK] to display the Print menu.
Call it out by pressing [MENU].
Press [
MENU], select [
System settings], press [
OK], select [Print], and then press
[
OK]. This will perform the same operations.
2.
Set the details to be output
(1) Select either [Print Date/Time], [Print
Sample ID], or [Barcode ID], and then
press [
OK].
(2) Select [on] or [off], and then press
[
OK].
The barcode ID does not display on
models that are not compatible.
Barcode ID input
It is possible to input the barcode ID
(maximum of 22 characters) with the use
of a barcode reader.
Make sure the reading of the ID has
been completed with the barcode reader
before output.
Alternatively, it is also possible to pre-
input the barcode ID in advance from a keyboard by entering it in [Input Character String] and
pressing the [
ENTER] key.
3.
Return to the weight measurement mode
Press [
POWER].
*
DATE 2019 Nov.02
TIME 18.31.34
234567890123456789012
AAAAA0008
175.9320 g
DATE 2019 Nov.02
TIME 18.31.39
1234567890123456789012
AAAAA0009
175.9320 g
Blank line
Date
Time
Barcode ID (maximum of 22 characters)
Sample ID (maximum of 5 characters
+ additional 4 characters)
Weight Value
Blank line
Date
Time
Barcode ID (maximum of 22 characters)
Sample ID (maximum of 5 characters
+ additional 4 characters)
Weight Value
Print example when all of the [Print Date/Time], [Print Barcode ID]
and [Print Sample ID] parameters have been set at [ON].
*
*
