Shimadzu AGS-100NX, Instruction Manual

Page: 23 / 154

Chapter 1 Overview
1-3
1.2 AGS-X Unit Specifications
1. Basic Specifications
(1) Max Load Capacity
1
10 kN
(2) Load Cell Capacity Select from 1 N, 2 N, 5 N, 10 N, 20 N,
50 N, 100 N, 500 N, 1 kN, 5 kN, or 10 kN.
(3) Crosshead-to-Table Distance (max value, not including jigs)
•
Standard Model 1200 mm
•
250 mm Extended Height Model 1450 mm
•
500 mm Extended Height Model 1700 mm
(4) Effective Specimen Width 425 mm
(5) Drive Motor 400 W AC Servo Motor
(6) Dimensions
•
Standard Model W653

D520

H1603 mm
•
250 mm Extended Height Model W653

D520

H1853 mm
•
500 mm Extended Height Model W653

D520

H2103 mm
(7) Weight
•
Standard Model About 85 kg
•
250 mm Extended Height Model About 90 kg
•
500 mm Extended Height Model About 95 kg
(8) Power Supply Voltage
2
Single phase, 50/60 Hz,
100/120/220/240 V switchable
Switch Setting Nominal Voltages
100 V 100/110 V
120 V 115/120/125/127 V
220 V 200/220/230 V
240 V 240 V
(9) Power Supply Capacity 1.2 kVA
(10) Power Consumption
3
300 W
(11) Short Circuit Current Rating 1.5 kA
(12) Ground Type-D Ground (grounding resistance of
max. 100 ohm)
(13) Operating Environment
•
Temperature
4
5

C to 40

C
•
Humidity
5
20% to 80%
•
Power Supply Voltage Fluctuations Within

10% of specified value
•
Floor Vibration Max 10 Hz frequency and 5

m amplitude
1
This is the maximum load capacity for the AGS-X loading frame. If a load cell with a capacity less than 10 kN is used, the
maximum load capacity is 150% of the rated load cell capacity.
2
Requires a separate power supply for the computer.
3
Equipped with automatic energy saver function.
4
Keep temperature variations during tests within

2

C.
5
With no condensation.