Stages
Dynamic Drive
User Guide
Table Of Contents
Connections
2
Controls
Starter Settings
3
Specifications
IMPORTANT SAFETY INSTRUCTIONS
4
Page 1: ...Stages Dynamic Drive User Guide Table Of Contents Connections 2 Controls 2 Starter Settings 3 Specifications 3 IMPORTANT SAFETY INSTRUCTIONS 4 ...
Page 2: ...ange the gain is boosted and harsher distortion is introduced regardless of the STG switch position The HPF switch controls the amount of low frequencies in the amplification chain Just like the STG switch this one also has a significant impact on the tone and character of the overdriven signal but it only affects the lower part of the spectrum The HPF switch has three positions UP The low cut is ...
Page 3: ...hm input resistance OUT 6 3mm mono unbalanced 100Ohm output resistance Max output voltage can reach 36Vpp 24dBu POWER IN 9V DC 180mA or 12V DC 140mA negative tip 2 1 5 5mm The pedal has no battery slot Use a regulated PSU only NB The Stages has a high current draw It can malfunction or refuse to turn on if the PSU isn t powerful enough Dimensions LхWхH 108x68x55mm 4 25x2 7x2 2 Weight 310g 0 68lbs ...
Page 4: ...e power supply input on the unit s top panel DISCONNECTING THE EXTERNAL POWER SUPPLY ADAPTER Unplug the external power supply adapter from the electric mains socket then disconnect the adapter s low voltage jack from the power supply input on the unit s top panel ATTENTION The unit contains no user serviceable parts Refer to qualified service personnel for any maintenance WARNING In order to avoid...
