Page 2
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
DLV01091
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
PARTS LIST
DESCRIPTION
ORDER PART # QTY
A
B
C
D
E
F
G
H
TABLE LEG
1/4" X 25 MM BOLT
8
HW0037
HW0105
BOLT COVER
24
HEX BOLT DRIVER
1
HW0006
1/4" X 35 MM BOLT
4
HW0142
Ø
Ø .
20 X
6 5 X 2.0 MM
WASHER
4
2
1
HW0594
FC0010
FOOT CAP
FACTORY ASSEMBLY
LEG CONNECTOR
BRACKET
Fig.2
A
H
Ø .
6 5 X 1.0 MM
WASHER
8
HW0004
Fig.1
C
H
D
F
B
H
G
E
Step 1:
Do not attempt assembly if any parts are missing or damaged.
Step 2:
F
Hand
tighten only.
Step 4:
Do not over tighten.
Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in carton against the
parts list.
Attach the leg connector bracket to a table leg by using four 1/4"x25 mm bolts and washers as shown in
.
Repeat for the oppose side.
1/4"x
mm
s
After making any necessary adjustments to the alignment of the table legs and the table top, use the hex bolt driver to
tighten all bolts. Each bolt must be tightened a few revolutions at a time, alternating between bolt connections. Repeat
until all bolts are tight.
Over tightening may strip bolts. Cover all bolts with covers. Your table
is now ready for use.
ig 1
Step 3:
Fig.2. Do not tighten completely.
With the help of another person, carefully place the table top onto the table base
. After making any necessary adjustments to the alignment of the table top and the table base, use four
35
bolt and washers as shown in
Repeat on the other side. (Note:
holes do not go through to the top of the table. Holes shown for illustration purposes only.)
(
)
This product does not include the
tabletop
IMPORTANT NOTE: Damage to welds or frames resulting from over tightened bolts or improper assembly is not
covered under our warranty. Please read all instructions carefully before assembly. If you have any questions regarding
your assembly, call our Customer Service Center at 1-800-416-3511.
AT52653
AT52654
