Shenzhen Hongdian Technologies H7960, User Manual

Page: 87 / 148

Hongdian Corporation
80
H792x 3G/4G Router User Manual
4.5.5 Dynamic Routing (Optional)
RIP configuration
RIP protocol (Routing Information Protocol) is the most widely IGP (Interior Gateway
Protocol) , it was designed for the same technology used in small networks, and therefore
adapt to most of the campus network and used in a continuous regional networks that the
rate change is not big, H7960 3G/4G Router supports RIP v2 protocol. For more complex
environments, generally do not use the RIP protocol.
Step 1 Click “Forward > RIP” to open “RIP” tab, as Figure 5-53.
Figure 4-44 RIP interface
Parameter Instruction as Table 5-26.
Table 4-26 RIP Parameter Instruction
Parameter Details Operation
RIP Service Enable or disable RIP
Service Click the button to select.
 Enable
 Disable
Redistribute
Connected Enable or disable
Redistribute Connected Click the button to select.

Enable

Disable
Redistribute
Static Enable or disable
Redistribute Static Click the button to select.

Enable

Disable