Shenzhen Hongdian Technologies H7920, User Manual

Page: 86 / 142

(2014-07-01)
- 72 -
is based on the destination address as an alternative route; while policy route is based on the
source address that match with the policy to forward the packets (forwarding router detects
the received packet's source address, and then according to the source that match the
appropriate address of policy route to forward) and policy routing priority, use numbers 3 to
252 to differentiate, the smaller number with higher priority. And there are priorities between
static routing and policy routing: policy routing higher priority than static routing.
Step 1 Log-on WEB GUI of H8951 3G 4G router .
Step 2
Click “Forward > Routing” to open “NAT” tab, as Figure 5-49.
Figure 5-48
Static Routing Interface
Step 3
Click “Add” to add a new static route, configure interface as Figure 5-50 and Figure 5-51.
Figure 5-49
Static Routing Interface