Shenzhen Hongdian Technologies H7920, User Manual

Page: 85 / 142

H8951 3G 4G router 5 Router config
(2014-07-01)
- 71 -
Figure 5-47
MASQ configuration
Step 4
Configure MASQ rule parameter.
Table 5-24
MASQ rule Parameter instruction
Parameter Details Operation
NAT Type To select “MASQ” Select “MASQ”
Interface Interface includes:

br0: use br0 interface as commutation
address between router & LAN and
external network

Modem: use modem interface as
commutation address between router
& LAN and external network

eth0: use eth0 interface as
commutation address between router
& LAN and external network

eth1: use eth1 interface as
commutation address between router
& LAN and external network
Select from Dropdown List
Step 5
Single click “save” icon to finish.
MASQ rule: the source address of all packets in the LAN need to be transferred into the specific ip
address of the router, so the PC from the LAN can send packets out; If MASQ rule in the router will be
deleted, the router LAN of the PC can not communicate with the outside.
---END
5.5.3
Static Routing
Static routing can forward packets according that the user configure specific forwarding path
manually. Static Routing form is divided into static routing and policy routing, static routing