Ver 1.11 2018
33
4.1 Setting Up
The furnace is intended exclusively for use within dry, closed space.
The furnace must be positioned below an exhaust pipe or an exhaust hood.
Sufficient ventilation must be ensured at the set-up location, in order to draw off the
heat and possibly developing exhaust gas.
A clearance of at least 50 mm is to be observed sideward, to the rear and upwards of
the furnace. The lateral clearance to non-flammable materials can be reduced to 20
cm.
Minimum space requirements for the Blazir (incl. connections):
▪
Width: 1.4 m (0.8 m for non-flammable materials)
▪
Depth: 0.9 m
▪
Height: 1.0 m
The set-up surface must be level.
The net weight of the machine is 25 kg. The set-up surface must withstand an
appropriate load.
During operation, the room temperature must be between 5 °C and 40 °C; avoid large
variations in temperature.
The floor covering must be made of non-flammable material, so that hot material
falling out of the furnace cannot inflame the covering.
Set up the machine on a sturdy work table or work bench (on a non-flammable
surface).
Remove all packaging material.