DocRevB
68
Shearwater DiveCAN
®
Petrel
Storage and Maintenance
The Petrel dive computer should be stored dry and clean�
Do not allow salt deposits to build up on your dive computer� Wash your computer with fresh
water to remove salt and other contaminants�
Do not use detergents or other cleaning
chemicals
as they may damage the Petrel dive computer� Allow to dry naturally before storing�
Do not wash under high pressure jets of water as it may cause damage to the depth sensor�
Store the Petrel dive computer out of direct sunlight in a cool, dry and dust free environment�
Avoid exposure to direct ultra-violet radiation and radiant heat�
Do not store batteries in the Petrel for long periods (several months)� Batteries can and do
leak, so don’t risk your expensive computer on a simple task like removing batteries� Dead
batteries are at a higher risk of leaking�
Servicing
There are no user serviceable parts inside the Petrel�
Do not tighten or remove the faceplate screws�
Clean with water ONLY� Any solvents may damage the Petrel dive computer�
Service of the Petrel may only be done at Shearwater Research, or by any of our authorized
service centers�
Your nearest service center can be found at