24
Document Storage Tube
Manual Storage Tube & mounting rivets.
1.
If desired, locate the document storage
tube in a convenient location on the Post
Driver. The photo below shows the tube
mounted on the base plate, but other
locations are acceptable.
Manual Storage Tube mounted on Base Plate.
2.
Mark the location of the two mounting holes
using the storage tube as a guide (arrows
above).
3.
Drill two 3/16” holes.
4.
Attach the storage tube with the two pop
rivets supplied inside the tube.
Attachments and Options Assembly
Steel Post Holder Accessory
Steel Post Holders for HD-8 shown. Steel T-Post Holder on
left and Steel Square Post Holder on right.
Stabilizer (2 Foot) Extension Accessory
For driving 11-12-foot posts.
1.
Drill two (2) holes (9/16
”
) in foot plate of
Stabilizer as shown below.
HD-8 mounting hole locations in Stabilizer Foot.
HD-10/SHD-10 mounting hole locations in Stabilizer Foot.