SHARX SECURITY HTNC Series, Api Reference Manual, Page: 70 / 228

-70-
* ch#¹_strm#²_maxfps is explained
below
ch#¹_strm#²_bitrate 1 ~ ch#¹_strm#²_maxbr
current bitrate setting
* ch#¹_strm#²_maxbr is explained
below
ch#¹_strm#²_ratecontrol cbr or vbr
current bitrate control setting
ch#¹_strm#²_quality 1 ~ 100
current Quality setting
2) Explanation on “ch#¹_strm#²_
○○○”
in Parameter column of table in “3. Boost Parameter”
a. #¹ is the channel number between 1 and total_ch.
b. #² is the stream number between 1 and total_strm.
c.
○○○
can be fps, maxfps, bitrate, maxbr, ratecontrol, or quality, and used in combination with
valid “#¹” and “#²”. The followings are usage examples.
• ch#¹_strm#²_fps,
ch#¹_strm#²_maxfps,
ch#¹_strm#²_bitrate,
ch#¹_strm#²_maxbr,
ch#¹_strm#²_ratecontrol,
ch#¹_strm#²_quality
* You can check ch#¹_strm#²_maxfps via “ 4. Example ” “1) get the current setting only if
ch#¹_strm#²_fps item exists in config.txt response.
* You can check ch#¹_strm#²_maxbr via “ 4. Example ” “1) get the current setting only if
ch#¹_strm#²_bitrate item exists in config.txt response.
3) When you setup Boost stream Normal Condition, boost_enable value must be equal to 1.
If you change Normal Condition setting, Setup - Video & Image – Basic settings will be changed
accordingly.