SHARX SECURITY HTNC Series, Api Reference Manual, Page: 196 / 228

-196-
list string (ro)
• list[3]
* format : list[0] | list[1] | list[2] (‘|’ : differentiator)
list[0] = user
list[1] = level
list[2] = 0 : Motor & PTZ not support
list[2] = 1 : PTZ support
list[2] = 2 : Motor support
Example
1) get the current setting
http://”camera ipaddress”/system/user.php?app=get
2) add User
a. User ID/Password generation and level setup
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin1&pass=1234&level=1
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin2&pass=1234&level=2
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin3&pass=1234&level=3
b. PTZ control setup
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin4&pass=1234&level=3&p
tz_enable=1
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin5&pass=1234&level=1&p
tz_enable=0
c. Motor control setup
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin6&pass=1234&level=3&
motor_enable=1
http://”camera
ipaddress”/system/user.php?app=set&method=add&user=myadmin7&pass=1234&level=1&
motor_enable=0
* If you add a user when the user_count=10, it will cause error.
* In case the method=add, you must include user, pass, and level.