SHARX SECURITY HTNC Series, Api Reference Manual, Page: 108 / 228

-108-
14) Receiver address setup
http://”camera ipaddress”/event/smtp.php?app=set&smtp_receiver_list1=”e-mail address”
15) SMTP Test method
a. Mail server is not used
http://”camera
ipaddress”/event/smtp.php?app=set&method=test&smtp_enable=1&smtp_sender=”e-mail
address”&smtp_receiver=”e-mail address” &smtp_image_attachment=1
* If you set method=test in URI, you must include smtp_enable, smtp_sender, and
smtp_receiver.
* In the case method=test, smtp_enable must be 1.
* If smtp_image_attachment=1, an image is attached on mail transmission.
* If smtp_image_attachment=0, a text only mail is transmitted.
b. Mail server is used
http://”camera
ipaddress”/event/smtp.php?app=set&method=test&smtp_enable=1&smtp_sender=”e-mail
address”&smtp_receiver=”e-mail address”&smtp_use_server=1&smtp_server=”mail server
address”&smtp_server_port=25&smtp_user=”user name”&smtp_pass=”user password”
&smtp_image_attachment=1
* If you set method=test in URI, you must include smtp_enable, smtp_sender, and
smtp_receiver.
* In case of method=test, smtp_enable must be 1.
* If you set smtp_use_server=1 in URI, you must include smtp_server, smtp_server_port,
smtp_user, and smtp_pass.
* If smtp_image_attachment=1, an image is attached on mail transmission.
* If smtp_image_attachment=0, a text only mail is transmitted.
Caution
You must check the following values in the response to http://”camera ipaddress”/config.txt
Item Value Explanation
options SMTP SMTP available
* If “smtp_image_attachment” parameter is set to “1”, both “smtp_interval” and “smtp_limit”
parameter are set to “1”.
* If “smtp_image_attachment” parameter is set to “0”, both “smtp_interval” and “smtp_limit”
parameter are set to previous stored value.