SHARX SECURITY HTNC Series, Api Reference Manual, Page: 102 / 228

-102-
Event – Record:
Version : 1.00
Date : 2014. 09. 26
Revision History
Version Date Comment
1.00 2014-09-26 Initial version
Introduction
This chapter specifies how to set up the Record in detail.
Record URI
http://”ipaddress”/event/record.php
Record Parameter
Parameter Type Value
record_enable integer 0 : disable, 1 : enable
record_overwrite integer 0 : disable, 1 : enable
record_continuous integer 0 : disable, 1 : enable
record_stream integer camera video stream( 1 ~ 3 )
record_pre_time integer 0 ~ 10
record_post_time integer 0 ~ 60
record_audio integer 0 : disable, 1 : enable
record_schedule_value integer 0 : No Recording, 1 : Recording
record_device_type integer 0 : SD, 1 : CIFS, 2 : NFS
record_address string NAS IP:PORT
record_path string NAS path
record_size string storage capacity
record_id string NAS ID
record_password string NAS PW
method string check
record_device_status integer (ro)
0 : no storage, 1 : unformatted, 2 : formatting
3 : formatted, 4 : remove, 6 : bad
record_device_status_cifs integer (ro)
0 : no storage, 1 : unformatted, 2 : formatting
3 : formatted, 4 : remove, 6 : bad
record_device_status_nfs integer (ro)
0 : no storage, 1 : unformatted, 2 : formatting
3 : formatted, 4 : remove, 6 : bad
record_device_format integer (ro) 1 : available format, 0 : not available format
record_device_format_cifs integer (ro) 0 : formatted, 1 : not formatted
record_device_format_nfs integer (ro) 0 : formatted, 1 : not formatted
record_device_remove integer 1 : available remove, 0 : not available remove