STEAM AND STEAM SPRAY
Always test a small area of carpet or upholstery for color fastness before cleaning with water or cleaning solutions.
Switch the Turbo Steam control to
ON
. Wait one or two minutes
to allow the water to become hot enough for the Steam Wizard
to produce steam.
Slide the function control to
STEAM
. For stubborn stains the
STEAM SPRAY
position can be used to dilute the stain with hot
water. Do not over-saturate the area with water.
Glide the nozzle over the stained area until the stain is lifted.
Once the stain is removed, excess water can be removed by
switching to
VACUUM
.
Do not allow the collection chamber to become too full.
When steam cleaning carpet, use the unit without any of the
attachments in place.
Use the brush attachment for cleaning upholstery or fabric.
Only operate in these modes with water in the water tank.
NOTE
TURBO STEAM
OFF
ON
SPRAY
STEAM
OFF
VACUUM
