Usage Instructions
Filling Unit with Water:
1. Make sure the unit is unplugged before filling with water. If unit has
been used previously, make sure it has been unplugged for a minimum
of 30 minutes.
2. Open the water resevoir lid.
3. Fill measuring water cup (included with unit) up to the red MAX FILL line
with distilled or demineralized water and pour slowly into reservoir.
DO NOT overfill.
4. Return water cup to its place on the base.
5. Screw down reservoir lid firmly.
Steam Cleaning Jewelry:
6. Plug into 120V AC outlet.
NOTE:
To reduce the risk of electric shock, this appliance is equipped
with a polarized plug (one blade wider than the other). This plug will fit in
a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install
the proper outlet. Do not change the plug in any way.
7. The Ready Indicator Light will turn on and begin to flash. Unit will take 2 – 3
minutes to pre-heat. When unit is heated and ready to use the Light will stop
flashing and be solid blue.
8. Apply steam with a gentle push to the Steam Activator Button. Plunging the
button all the way down will create excessive steam and will quickly reduce
the steam pressure.
9. For best results, bring jewelry up to nozzle tip where steam temperature is
hottest. Never hold with bare fingers. Use mesh basket or long tweezers,
both include with your jewelry cleaner.
10. Clean you jewelry in 10-20 second cycles, allowing 5-10 seconds
between the cycles for pressure to build.
11. Wipe moisture off jewelry and unplug unit immediately after cleaning period.
CG-J100_Jewelry Steam Cleaner.aiPage 1 6/29/09 8:48:47 AM
MAX. FILL
Do not fill above this line
Fig. 1
Water Reservior Lid
LED Light
Power Cord
Steam Activator
Button
Ready Indicator Light
Steam Jet
Jewelry Basket
Max Fill Line
Water Cup
In-Home Professional Jewelry Steam
Cleaner Features
Tips for Optimum Ring Cleaning:
To thoroughly clean rings, bring piece up to nozzle tip where steam temperature
is hottest. Hold ring with tweezers (included) over basket, turn upside down
and steam the underside first. Then turn right side up and run a steam cycle on
the top side. You may find that intricate pieces, or those with multiple surfaces,
will require several 10-20 second cycles to get all surface areas clean. We
recommend running the piece through one cycle in the basket, and then use the
tweezers to hold the item at the proper angle under the steam jet to get individual
areas clean.
7
6
