C. Assembly procedure
Basically reverse the disassembly procedure.
The mirror base drive wire and the lens drive wire stretching methods
are described below.
a. Mirror base drive wire stretching
1
Hook the metal fixture of the mirror base drive wire on the projec-
tion of the optical base plate.
2
Pass the wire through the external groove of the double pulley. (At
that time, check that No. 2/3 mirror unit is in contact with the
mirror base positioning plate.)
3
Hold so that the winding pulley groove is up, and wind the mirror
base drive wire 8 turns.
4
Put the 7th turn of the mirror base drive wire in the winding pulley
groove and fix with a screw.
5
Pass the wire under Mo. 2/3 mirror unit plate and wind it around
pulley A.
6
Pass the wire through the internal groove of the double pulley,
and pass through pulley B.
7
Hook the spring hook on the optical base plate.
*
After installing the mirror base drive wire, be sure to perform
horizontal image distortion adjustment.
6
3
2
7
3
6
7
5
1
1
2
4
6
2
5
6
6
6
2
8 – 4
www.freeservicemanuals.info
1/11/16
Published in Heiloo, Holland.
