Sharp XV-Z3100 - DLP Projector - HD 720p, Operation Manual

Page: 66 / 69

64
Specifications
Projector
XV-Z3100
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480
I /DTV480P/
DTV540P/DTV576
I
/DTV576P/DTV720P/DTV1035
I
/DTV1080
I
/DTV1080
I
-50
DLP
®
chip
Panel size: 0.62
"
Drive method: Digital Light Processing (DLP
®
)
No. of dots: 921,600 dots (1280 [H]
×
720 [V])
1–1.15
×
zoom lens, F2.4–2.6, f = 19.0–21.9 mm
220 W DC lamp
RCA connector
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
(C
B
): 0.7 Vp-p, 75
Ω
terminated
P
R
(C
R
): 0.7 Vp-p, 75
Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
HDMI terminal (video signal only)
720 TV lines (DTV720P)
45–85 Hz
15–70 kHz
12–85 MHz
9-pin mini DIN connector
Power jack: DC 12V output
AC 100–240 V
3.1 A
50/60 Hz
303 W (Lamp Setting “Bright”)/
234 W (Lamp Setting “Eco + Quiet”) with AC 100 V
293 W (Lamp Setting “Bright”)/
228 W (Lamp Setting “Eco + Quiet”) with AC 240 V
4 W (AC 100 V) – 5 W (AC 240 V)*
1
1,140 BTU/hour (Lamp Setting “Bright”)/
1,100 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V
880 BTU/hour (Lamp Setting “Bright”)/
860 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12
13
/
32
"
×
4
19
/
64
"
×
11
1
/
32
"
(315 (W)
×
109 (H)
×
280 (D) mm) (main body only)
12 13 /
32
"
×
4 47 /
64
"
×
11 37 /
64
"
(315 (W)
×
120 (H)
×
294 (D) mm) (including adjust-
ment foot and projecting parts)
8.8 lbs. (4.0 kg)
Remote control, Power cord for Europe, except U.K., Power cord for U.K. and
Singapore, Power cord for Australia, New Zealand and Oceania, 21 pin RCA
conversion adaptor, Video cable, Operation manual
Product type
Model
Video system
Display method
Lens
Projection lamp
Component input signal
(INPUT1/2)
S-video input signal
(INPUT 3)
Video input signal
(INPUT 4)
Computer RGB/
Component input signal
(INPUT 5)
HDMI input signal
(INPUT 6)
Horizontal resolution
Vertical frequency
Horizontal frequency
Pixel clock
RS-232C terminal
TRIGGER terminal
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
* 1 When STANDBY Mode is set to “Eco”
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
XV-Z3100_EN_m 06.10.18, 9:22 AM 64